PowerPact3 IMP3A

PowerPact3 IMP3AClick to Zoom

The IMP3A is the first Freescale Power Architecture QorIQ-based single board computer to join the PowerPact3 family of 3U CompactPCI processors. This product is designed for demanding, high performance computing applications where size-, weight-, and power-constraints (SWAP) are critical to success.

With the new P2020 and P2010 processor options the IMP3A will deliver unparalleled performance in a single slot solution. Features of the QorIQ P2 processor are:

-          System on Chip (SoC) processors with high-performance e500 cores built on Power Architecture Technology
-          45 nanometer technology delivers unprecedented performance per watt, enabling power-efficient designs
-          Dual- and single-core products
 
The IMP3A is offered with an impressive range of I/O that includes two Gigabit Ethernet channels, up to 16 GPIO, two SATA channels, two COM ports, and USB 2.0. The IMP3A can be factory configured as either a system slot SBC supporting 48 pins of PMC I/O to J2, or a peripheral slot SBC supporting 64 pins of PMC I/O to J2.
 
Available in air- and conduction-cooled build levels for rugged computing, the IMP3A is fully supported by comprehensive Deployed Test Software (BIT and BCS) and support planned for popular real time operating systems including VxWorks, Integrity and LynxOS®. 

-  Freescale QorIQ processor up to 1.2 GHz
o  Two e500v2 cores
o  Shared 512 KB L2 Cache with ECC
o  Integrated DDR3 memory controller with ECC
-  Up to 4 GB soldered DDR3 RAM with ECC
-  8 GB SATA SSD Flash and 128 KB of NVRAM
One PCI-X PMC expansion site
  • Freescale Alliance
  • PLM Program
  • RoHS Compliant
  Type Title
Datasheet IMP3A
White Papers Designing and Manufacturing Rugged COTS Assemblies
What to look for when designing and selecting rugged COTS-based products.
Requires Authorization Application Notes PMC Installation Guide
Requires Authorization BIT Guide BIT on IMP3A Software Reference Manual
Requires Authorization BIT Guide BIT V4 User Guide
Configuration Guide IMP3A Configuration Guide
Configuration Guide Ruggedization Levels
Requires Authorization Hardware Manual CPCI3UX606 Hardware Reference Manual
Requires Authorization Hardware Manual I/O Modules Manual Ed20
Edition 20
Requires Authorization Hardware Manual IMP3A Hardware Reference Manual
Requires Authorization Hardware Manual IMP3A Test Access Card Hardware Reference Manual
Requires Authorization Hardware Manual PowerPact3 Family Hardware Reference Manual
Requires Authorization Quick Start Guide PowerPact3 Quick Start Guide
Requires Authorization Software Manual U-Boot Firmware User Guide
Requires Authorization Software Manual VxWorks BSP for IMP3A HTML Pages
After unzipping, open target.html in extensions/eclipse/plugins/com.windriver.ide.doc.bsp_vxworks_6.9/ge_imp3a
Requires Authorization Software Manual VxWorks ESP for IMP3A HTML Pages
After unzipping, open target_esp.html in extensions/eclipse/plugins/com.windriver.ide.doc.bsp_vxworks_6.9/ge-imp3a
Requires Authorization Software Manual Workbench/Platforms/VxWorks GEIP BSP Installation on PowerPC-Based SBCs Software Reference Manual (M)
Requires Authorization Software Manual Workbench/Platforms/VxWorks GEIP ESP Installation Software Reference Manual
Requires Authorization Software Release Notes IMP3A VxWorks BSP Rel 1.3
Requires Authorization Software Release Notes IMP3A VxWorks ESP Rel 1.1
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Towcester, UK
Tove Valley Business Park
Towcester, Northamptonshire, -- NN12 6PF

Support Phone: +44 (0) 1327 322760
Support E-mail: support.towcester.ip@ge.com
RMA E-mail: repairs.towcester.ip@ge.com


Americas

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.embeddedsystems.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


CPCI3UX606-11 - Module is a customized interface adapter, compatible with 3U CompactPCI backplanes. It fits directly onto the rear P2 position of the backplane and is suitable for interconnection with the PowerPact IMP3A host card. 

IMP-IOKIT3 - I/O kit to support the IMP3A. Comprises of the following components:

  • 1x IMP3A Rear I/O paddle card (CPCI3UX606-11)
  • 1x 3U Serial I/O Panel with 2 x 9 Way D type connectors and 0.5 internal ribbon cable. For use with COM 1 and COM 2 port. (SIOX600-S)
  • 1x 2 way shielded 3U 10/100/1000BaseT Panel supplied with two 0.5m CAT5e shielded cables for use with all 10/100BaseT and 10/100/1000BaseT capable product (10BT2X600-STP)
  • 1x Type A USB2 plug to Type A USB2 socket panel mount x 2 on a 3U plate (USBX607-11)

Request a Quote for
PowerPact3 IMP3A



News:

GE Wins Orders from Lee Air for High Density Avionics Interface Read more
New Rugged Single Board Computer from GE Intelligent Platforms Features More Processing Power,... Read more
New 3U VPX Single Board Computer Delivers Increased Performance with no Increase in Size, Weight or... Read more